Part II Drawing in Two Dimensions in .NET

Produce UPC A in .NET Part II Drawing in Two Dimensions
Part II Drawing in Two Dimensions
scan upc-a supplement 5 in .net
Using Barcode Control SDK for VS .NET Control to generate, create, read, scan barcode image in VS .NET applications.
To define a distance (from the corner) and an angle, right-click and choose Angle. At the Specify chamfer length on the first line <1.0000>: prompt, enter a distance. This is the same as the first chamfer distance. At the Specify chamfer angle from the first line <0>: prompt, type the angle between the first line and the chamfer line. To extend two nonparallel lines to make a corner, set the chamfer distances to zero and then chamfer the lines. AutoCAD extends them to meet. If they already intersect, AutoCAD trims them to create a corner. The pick points on intersecting lines should be on the part of the lines you want to keep (not on the part of the lines you want to trim off). Now that you ve specified the settings you want, you re ready to chamfer. Your distances or distance and angle are displayed as you just specified them. AutoCAD repeats the Select first line or [Polyline/Distance/Angle/Trim/ Method]: prompt. Select the first line. Unless you are creating a chamfer with equal distances, the order in which you select the lines is important. AutoCAD trims the first line selected by the first distance and the second line selected based on either the second distance or the angle. At the Select second line: prompt, select the second line. AutoCAD chamfers the lines.
UPC A barcode library for .net
use vs .net upc-a encoder topaint upc-a supplement 2 on .net
CrossReference
GTIN - 12 recognizer for .net
Using Barcode decoder for VS .NET Control to read, scan read, scan image in VS .NET applications.
Choose the Polyline option to chamfer an entire polyline at once. Polylines are covered in 16. 24 discusses chamfering 3D models.
Attach barcode with .net
generate, create barcode none with .net projects
By default, CHAMFER trims the original lines that it chamfers. If you want to keep the full original lines when you add the chamfer line, choose the Trim option and choose No Trim.
Barcode barcode library for .net
using barcode implementation for vs .net control to generate, create barcode image in vs .net applications.
On the CD-ROM
Control gtin - 12 data with c#
universal product code version a data on c#.net
The drawing used in the following Step-by-Step exercise on chamfering lines, ab10-i.dwg, is in the Drawings folder of the AutoCAD 2002 Bible CD-ROM.
Asp.net Web Forms upc barcodes integrationon .net
use asp.net webform upc-a encoding toincoporate universal product code version a in .net
Step-by-Step: Chamfering Lines
Control upc a data with vb
upca data in visual basic.net
1. Open ab10-i.dwg from your CD-ROM. 2. Save the file as ab10-10.dwg in your AutoCAD Bible folder. This drawing is a very small section of a porcupine mixer, as shown in Figure 10-30. 3. Choose Chamfer from the Modify toolbar. CHAMFER states the current mode and distances. If the distances are not zero, follow the prompts below. If they are already zero, skip to the next step.
Print bar code for .net
generate, create barcode none on .net projects
Select first line or [Polyline/Distance/Angle/Trim/Method]: Right-click and choose Distance from the shortcut menu. Specify first chamfer distance <1/2>: 0 Specify second chamfer distance <0>:
Create 2d data matrix barcode on .net
generate, create datamatrix 2d barcode none with .net projects
10 Editing Your Drawing: Advanced Tools
2d Matrix Barcode barcode library in .net
generate, create matrix barcode none in .net projects
2 4 1
Deploy modified plessey with .net
generate, create msi plessey none on .net projects
Figure 10-30: A mechanical drawing showing a small section of a porcupine mixer
Java code 128b printerfor java
use java code 128a writer toinsert barcode standards 128 on java
4. At the Select first line or [Polyline/Distance/Angle/Trim/ Method]: prompt, pick 1 in Figure 10-30. At the Select second line: prompt, pick 2. AutoCAD chamfers the two lines to make a corner. (If this doesn t work, you may have the Trim option set to No Trim. Change the setting to Trim and try again.) 5. Repeat the CHAMFER command. Follow the prompts:
Gs1 Datamatrix Barcode barcode library for none
Using Barcode Control SDK for None Control to generate, create, read, scan barcode image in None applications.
Select first line or [Polyline/Distance/Angle/Trim/Method]: Right-click and choose Angle. Specify chamfer length on the first line <1>: 9/16 Specify chamfer angle from the first line <0>: 45
Include bar code on font
use font bar code writer tocompose bar code with font
6. At the Select first line or
USS-128 generation in vb.net
generate, create ucc.ean - 128 none in vb projects
[Polyline/Distance/Angle/Trim/Method]: prompt, pick 3 in Figure 10-30. At the Select second line: prompt, pick 4. AutoCAD chamfers the
Data Matrix barcode library with visual basic
generate, create data matrix ecc200 none with visual basic projects
two lines, as shown in Figure 10-31. 7. Save your drawing.
Control ucc ean 128 data on visual c#.net
ean/ucc 128 data for visual c#.net
Creating rounded corners
Code 128 Code Set C barcode library on c#
using barcode generating for web pages crystal control to generate, create code-128c image in web pages crystal applications.
The FILLET command creates rounded corners, replacing part of two lines with an arc. Fillets are often used in mechanical drawings. In certain cases, you can use FILLET instead of the ARC command to create arcs. As with CHAMFER, you can fillet lines, xlines, rays, and polylines they can even be parallel. You can also fillet circles, arcs, and ellipses.
RDLC Report Files pdf417 creationon .net
using barcode printing for rdlc reports net control to generate, create pdf417 2d barcode image in rdlc reports net applications.
Part II Drawing in Two Dimensions
Figure 10-31: The edited drawing after using the CHAMFER command
Note
You pronounce the t in Fillet. It s not pronounced like filet of fish!
The FILLET command defines the fillet arc by its radius, as shown in Figure 10-32.
Figure 10-32: A fillet consisting of two lines and an arc
Radius Arc center
Fillet arc
Like chamfering, filleting is a two-step process. First you define the radius of the fillet arc. Then you select the two lines you want to fillet. AutoCAD fillets them using the information you specified. To specify the fillet information, choose Fillet from the Modify toolbar. You cannot select objects before the command with Fillet. AutoCAD responds with the Current settings: Mode = TRIM, Radius = 0.5000 Select first object or [Polyline/Radius/Trim]: prompt. Right-click and choose Radius. At the Specify fillet radius <0.5000>: prompt, type the radius you want. The default is either 0.5000 or the last radius you specified. AutoCAD repeats the Select first object or [Polyline/Radius/Trim]: prompt. Select the first object you want to fillet. At the Select second object: prompt, select the second object you want to fillet. AutoCAD creates the fillet.