Top and Bottom Turns in Visual Studio .NET

Painting QR-Code in Visual Studio .NET Top and Bottom Turns
6.1 Top and Bottom Turns
QR-Code Scanner In Visual Studio .NET
Using Barcode Control SDK for .NET Control to generate, create, read, scan barcode image in Visual Studio .NET applications.
When sailing downwind and going fast, you are always looking for the gap in the waves the space in the wave of least resistance so you can carry on sur ng without loading up the rig. Obviously you cannot always be sur ng, but in conditions where you can, you want to hold the surf for as long as possible. It takes far less energy to keep the boat sur ng than it does to get it to surf in the rst place. Even in conditions where you can go over the waves, you are always looking for the attest point to cross.
QR-Code Generator In VS .NET
Using Barcode creation for VS .NET Control to generate, create QR Code image in VS .NET applications.
When you start jumping waves, you need to be careful that you do not go clean over a wave and then bury your bow in the wave in front. (Sometimes you have to slow down to stay upright.) There will come a point when there is enough speed to go straight over the waves (and indeed there is a point where it is not worth steering as you can not catch the waves). At that stage you go straight to the mark. However, in these conditions there tends to be less difference in speed, hence the importance of working on top and bottom turns. This is also true when you do not have enough speed to catch the waves (or the waves are too small to catch), when you are more or less pointing at the mark (just looking to stay in the pressure). The key point is to nd a sitting position where the boat is nely balanced. Now only small movements will allow you to change the boat s direction. If you nd yourself always leaning in (or out) then something is wrong with your sitting position. (Or maybe with your rig set-up check: are you over or under powered )
Decoding QR-Code In .NET Framework
Using Barcode reader for .NET Control to read, scan read, scan image in .NET framework applications.
6.1a To get the boat to head up you need to put in some leeward heel and sheet in the main.
Bar Code Creation In Visual Studio .NET
Using Barcode printer for VS .NET Control to generate, create barcode image in .NET framework applications.
Boat Handling
Bar Code Scanner In .NET
Using Barcode scanner for .NET framework Control to read, scan read, scan image in .NET applications.
6
QR Code Creation In Visual C#
Using Barcode maker for .NET Control to generate, create Denso QR Bar Code image in .NET applications.
6.1b To get the boat to bear away you need to put in some windward heel and sheet out the main.
Encoding QR In .NET
Using Barcode drawer for ASP.NET Control to generate, create Denso QR Bar Code image in ASP.NET applications.
6.1c When the boat has reached the desired direction, you need to set the heel and sheeting so the boat continues in a straight line (do the opposite of what you did to start the turn).
Denso QR Bar Code Maker In VB.NET
Using Barcode creator for Visual Studio .NET Control to generate, create QR-Code image in .NET framework applications.
Example: The breeze is dropping, so you move your weight right in and sheet in slightly to head up into more wind. Allow the rudder simply to follow the boat. As you get into more pressure, you sit on the side and the boat comes at and accelerates (the sheet is already in, so no need to sheet). Now bear away to stay in the gust by sheeting out, and the boat will come slightly on top of you. When it is going in its new desired direction sit in slightly so the helm is neutral. The more kicker you apply, the easier it is for the boat to head up. (Think: you often have more kicker on upwind than down.) The closer the course you are sailing is to a reach, the more kicker you need. The least kicker you need is on the run (although you always need some), so the leach returns after opening. (You also need some kicker for tapered masts to support the top of the mast!) If you are making turns downwind and then holding the angle for a bit (going high in the lulls and low in the gusts), it may well be worth playing (constantly adjusting) the kicker.
Bar Code Maker In Visual Studio .NET
Using Barcode generation for .NET framework Control to generate, create bar code image in .NET framework applications.
6.2 Tacks and Gybes
Paint EAN / UCC - 13 In Visual Studio .NET
Using Barcode printer for .NET framework Control to generate, create EAN13 image in Visual Studio .NET applications.
The exact movement of your hands and feet will be very similar for both, regardless of the conditions. What will change is the speed and timing (see 6.3). A good tack is a tack where you continue to make maximum progress upwind. The aim is not to tack as quickly as possible, or to come out as fast as possible, but to continue getting closer to the windward mark as fast as you can. The boat may then (as a result) spend a reasonable amount of time head to wind (going a bit slower, but in exactly the right direction). This obviously depends upon the class and the sailing conditions. A good gybe run to run follows the same principle. You wish to make as much ground downwind as possible. There may be times when you have to tack or gybe quickly, so it is important to practise this occasionally. However, priority should be given to doing good tacks and gybes. Remember, the slower the turn the easier it is to get across the boat, but the slower the boat may end up going, so be careful not to load up the rig. Generally you want to turn as fast as you can with good crew movements.
UPC Symbol Encoder In VS .NET
Using Barcode encoder for .NET framework Control to generate, create Universal Product Code version A image in VS .NET applications.
Print Delivery Point Barcode (DPBC) In VS .NET
Using Barcode creator for .NET framework Control to generate, create Delivery Point Barcode (DPBC) image in VS .NET applications.
Make Code128 In Visual C#
Using Barcode generator for .NET Control to generate, create Code 128 Code Set C image in .NET applications.
Barcode Printer In Java
Using Barcode printer for Java Control to generate, create barcode image in Java applications.
Bar Code Drawer In Visual Basic .NET
Using Barcode drawer for .NET framework Control to generate, create bar code image in VS .NET applications.
EAN / UCC - 13 Generation In Visual Studio .NET
Using Barcode maker for ASP.NET Control to generate, create EAN / UCC - 13 image in ASP.NET applications.